Jump to content

Photo

New JNCIP-ENT JN0-647 Dumps with VCE and PDF (Recently Updated)



No replies to this topic

#1 Nov 16 2017 03:31 AM

    MohammadHosam

    Newbie


  • Pip
  • Last active: Nov 16 2017 03:38 AM
  • Joined: 16 Nov 2017
  • Posts: 1 posts
  • 2 thanks
    • Country: Country Flag

ATTENTION PLEASE!!! The JNCIP-ENT JN0-643 exam has retired, and the new exam is JNCIP-ENT JN0-647 test now!!!
 
The new JNCIP-ENT JN0-647 (Nov/2017 Updated) dumps now are available, here are part of JN0-647 exam questions (FYI):
 
[Get the download link at the end of this post]
 
NEW QUESTION 1
Your campus EX9200 core devices are highly oversubscribed on bandwidth and reporting massive dropped packets. To immediately address the issue, you decide to implement shaping on all interfaces. Which action will accomplish?
 
A. Apply the input-shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.
B. Define a CoS input traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
C. Define a CoS output traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
D. Apply the shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.
 
Answer: C
 
NEW QUESTION 2
What allows non-Web enabled devices to access the network on a port configured for captive portal?
 
A. A MAC address white list can be configured on the switch to allow specific MAC addresses to bypass the captive portal process.
B. LLDP can be used to query the type of device that is attempting to access the network, and predefined device types can be allowed to bypass the captive portal process.
C. Captive portal can be configured to only prompt for credentials when HTTP or HTTPS traffic is requested on a port to allow on-HTTP enabled devices access to the network.
D. Authentication credentials for specific devices can be preconfigured on the switch for automatic authentication.
 
Answer: A
 
NEW QUESTION 3
Which two statements are true about PIM source-specific multicast (SSM)? (Choose two.)
 
A. The receiver DR builds a source-base tree to the RP.
B. S,G is always used.
C. A Different group address must be used by each source.
D. IGMPv3 is required.
 
Answer: BD
 
NEW QUESTION 4
Which two statements about MVRP are correct? (Choose two.)
 
A. MVRP monitors interfaces using VSTP and dynamically creates VLANs as necessary.
B. MVRP PDUs are sent to other switches as periodic intervals.
C. MVRP can propagate dynamic VLANs created on one switch to another switch.
D. MVRP is enabled by adding trunk ports under the [edit protocols mvrp] hierarchy.
 
Answer: BD
 
NEW QUESTION 5
Which three databases are used by the Dijkstra algorithm? (Choose three.)
 
A. Tree database
B. Link State database
C. Candidate database
D. MAC database
E. Configuration database
 
Answer: ABC
 
NEW QUESTION 6
A customer needs to pass Layer 2 protocols between sites. Which protocol or standard would be required to implement connectivity on EX4300, EX3400, and EX2300 devices?
 
A. Q-in-Q
B. IGMP
C. VPLS
D. OSPF
 
Answer: A
 
NEW QUESTION 7
Which statement is correct about MSTP?
 
A. MSTP enables mapping multiple independent spanning-tree instances onto one physical topology.
B. MSTP enables dynamic discovery of Layer 2 neighbors.
C. MSTP dynamically manages VLAN registration in a LAN.
D. MSTP uses stacked VLAN tags to extend a Layer 2 Ethernet connection between multiple sites.
 
Answer: A
 
NEW QUESTION 8
You configured static mode power management on an EX4300 to provide PoE power to telephone and access point equipment. Which statement is correct regarding the PoE power budget?
 
A. Power is budgeted to devices on a first come, first served basis as devices are connected.
B. The power budgeted will be based on the device class connected to each port.
C. Power is budgeted to a port even if no device is connected to the port.
D. The power budgeted to ports will adjust to how much power a device actually uses.
 
Answer: C
 
NEW QUESTION 9
What information must you gather from the satellite device to provision a Junos Fusion Enterprise deployment on the aggregation device? (Choose two.)
 
A. MAS address
B. Serial number
C. Software version
D. Model number
 
Answer: AB
 
NEW QUESTION 10
You are asked to merge a RIP network with your OSPF network. As a first step, you establish connectivity between the RIP network and the OSPF network. The RIP network connects to an NSSA area. Which two statements are true in this scenario? (Choose two.)
 
A. To share RIP routes with the OSPF network, an export policy will be required on the ABR.
B. To share RIP routes with the OSPF network, an export policy will be required on the ASBR.
C. By default, external OSPF routes have a higher route preference than RIP routes.
D. Be default, RIP routes have a higher route preference than external OSPF routes.
 
Answer: BD
 
NEW QUESTION 11
You created a firewall rule to protect the Routing Engine. After applying the rule, your OSPF adjacencies dropped. How would you solve this problem?
 
A. Create a firewall term that allows IP protocol 89.
B. Define a router ID under the [edit routing-options] hierarchy.
C. Configure the loopback interface under the [edit protocols ospf] hierarchy.
D. Apply the firewall filter to the physical ports.
 
Answer: A
 
NEW QUESTION 12
What are two OSPF LSA types? (Choose two.)
 
A. Stub
B. Router
C. Transit
D. Network
 
Answer: BD
 
NEW QUESTION 13
......
 
Get the newest PassLeader JN0-647 VCE dumps here: https://www.passlead...om/jn0-647.html
 
OR
 
Download more NEW PassLeader JN0-647 PDF dumps from Google Drive here:
 
 
OR
 
Read the newest PassLeader JN0-647 exam questions from this Blog:
 
 
Good Luck!!!


Thanked by 2 Members:
rafalkaminski , rahulsinghnyny

Reply to this topic



  



Also tagged with one or more of these keywords: Offer

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

About us

The Certcollection.net community is an IT focused community. It is a gathering place for people, content and resources focused on different aspects of Microsoft, Cisco, CompTIA, Project Management,VMware,Storage,ITIL,Security and much more.

Copyright © 2012-2017 Certcollection.net. All rights reserved.